直動式三通電磁閥ODE技術數據
When the coil is energized the plunger moves to a position in
which it opens the main orifice and closes the exhaust orifice,
permitting fluid to flow from the inlet pipe to the outlet one and
preventing flow to the exhaust.
當線圈通電時，柱塞移動到位置其打開主孔并關閉排氣孔，
允許流體從入口管流出到出口一端防止流向排氣。
Notes:
On these valves, unlike the other models, the fluid shall enter
into the valve so to pass through the main orifice from the
lower side towards the higher one.

直動式三通電磁閥ODE技術數據
In this family of solenoid valves an increase in pressure causes
a reduction in the force required to open the valve: if the
pressure difference between inlet and outlet is greater than
the maximum value for which the solenoid valve has been
designed, the latter may open even when the coil is not energized.
在這些閥門上，與其他型號不同，流體應進入進入閥門，
以便通過主孔口下側向較高的一側。在這個電磁閥系列中，
壓力增加會導致減少打開閥門所需的力量：
如果入口和出口之間的壓力差大于電磁閥已達到zui大值設計時，
即使線圈未通電，后者也可能打開。
3 way normally closed solenoid valves have an inlet pipe, a
outlet pipe and an exhaust pipe. The plunger, on which two
gaskets are mounted, provides directly for opening and closing
the solenoid valve’s main orifice with one of the two gaskets
and, simultaneously, opening or closing the outlet orifice
with the other gasket.