BECKHOFF端子模塊樣本

BECKHOFF端子模塊樣本,倍福端子模塊效果圖

When using KL9180, KL9185 and L9195 bus terminal modules,
The multi-supply voltage can be separated by spring-type terminals. Using these bus terminal modules,
In other words, they account for 2 bits in the automation device process image.
The use of feed terminal modules can be used to build multiple voltage groups,
Can be any voltage potential group (KL9190),
It can also be a potential set of 24 V DC or 230 V AC (120 V AC).
The terminal module KL9010 is connected to the end of the bus terminal block.
Terminal block to KL9020 as the terminal terminal module,

BECKHOFF端子模塊樣本,倍福端子模塊效果圖
You can use an Ethernet cable with an RJ45 connector for expansion.
KL9020 can convert K-bus signal into RS485 signal.
The electronic components of the KL9020 are powered by K-bus. KL9020 To form a working unit,
Must be used with a KL9050 coupler terminal module.
The feeder terminal module can be fitted with filament fuses or not. To monitor the supply voltage,
The terminal module with diagnostic function can report
the status of the feeder terminal module to the bus coupler via two input bits.
In this way, for the controller, the voltage of the distributed peripherals can be checked via the fieldbus.
The operating point performance is consistent with the input terminal modules KL1002 (24 V) and KL1702 (230 V).
KL9195 can be spring-type contacts directly connected to the DIN rail, and electromagnetic radiation can be shielded.
 

,倍福端子模塊效果圖